Nitro Lacquer Clearcoat Matt 400ml
Clear coat for finishing guitars and other wooden instruments with excellent tonal qualities. Can be used on well-prepared wood for a natural finish, but also on our suStain, suStain Mica, Metal Flakes and on colored, metallic or pearl basecoats. Average use is 2 to 3 cans per guitar.
For even more convenience, you can use the Spray handle.
Please Note: This is a flammable product and cannot be shipped outside the EU or over sea!
In stock
Item
165002
€14.96
€12.36
- Buy 3 for €13.46 €11.12 each and save 10%
- Buy 6 for €12.72 €10.51 each and save 15%
Use:
Shake well before use.
Sand the object until grain 400, use a grain filler for open pore woods.
The last sanding should be in the direction of the grain until all scratches have been removed.
Remove dust and greasy residue and apply 2-3 thin layers by spraying in cross sections.
After that, spray the regular layers with 60 minutes drying time in between.
Maximum 3 layers per day and allow 24 hours to dry before applying the next 3 layers.
Apply in total between 9-12 full layers to account for sanding and polishing.
After the last 3 layers, let cure for 1-2 weeks minimum.
Sand lightly between coats for the best bond.
Clean the nozzle after use by inverting the can and spray for 3-5 seconds.
Make sure to use a fine dust mask and spray in a well ventilated area.
Find out more about Finishing materials, preparation and techniques in our how-to's about Finishing.
| Item | 165002 |
|---|---|
| Brand | TLC Guitar Goods |
| Color | Transparent |
| Type | Other |
| Touch dry after | 60 min |
| Material | Nitrocellulose |
| Weight | 408 g |
| Size | 68x195 mm |
| Sales unit | pce |
Write Your Own Review
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example:
Related Products
Check items to add to the cart or
We found other products you might like!
