Complete Menzerna polishing set
Give your instrument a professional finish with this polishing set. Menzerna polishing agents are silicone-free, water-based and show a perfectly beautiful shine without holograms in record time. Together with the application pads and the large ultra soft microfiber cloth, your instrument will be a feast for the eyes in no time! Then you can quickly move on to the next one, because with this set you can shine up a lot of instruments!
This set gives you everything for shiny finish and you’ll enjoy every step.
· Menzerna 400 Heavy Cut. Step 1 for removing scratches, sanding marks and overspray. The abrasive grains become smaller and smaller during polishing to remove finer grinding marks.
· Menzerna 2500 Medium cut. Step 2 to remove fine sanding marks. Leaves a nice shine without holograms.
· Menzerna 3500 Super Finish. Step 3 for the removal of the last fine polishing scratches and for a deep mirroring shine without holograms to gaze for hours.
· 2 Application pads: Doublesided yellow/red pad (yellow for step 1 and red side for step 2) and red (soft for step 3)
· 2 Microfiber cloth of 40x40 cm with soft edges for polishing scrape away any residues of polish.
Apply your Menzerna polishing agent to the corresponding application pad and make rotating motions over the surface until the polish is dry rubbed. Work the entire surface and wipe clean with a microfiber cloth. Look with an eye and with grazing light over the surface to check if the scratches have disappeared. Repeat if necessary or continue until you have completed all the steps.
Menzerna is also suitable for machine polishing.
The foam pads can be rinsed with lukewarm water and allowed to dry for next use.
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example: