Danish Oil 195ml

Preparation:
Ensure a well prepared surface sanded to grit 600. Then dry the surface and remove dust before applying the oil.

Use:
Apply the Danish oil with a pad, waterproof sandpaper, sponge, cloth, roller, brush or trowel. Rub the oil over the surface until it is absorbed into the wood and an even layer is formed. Leave for max. 20 minutes and then rub with a lint-free cloth or waterproof sandpaper. Let rest for 2-4 hours before applying a next layer.

To fill grain, apply the oil with 400 - 600 grit waterproof sandpaper in circular motions over the wood. After drying and rubbing, repeat with finer grit after every 2 layers and sand in the direction of the grain with the last 2 layers. Apply at least 4 layers for good protection. 

For a gloss finish apply min. 6-8 layers and rub with 3000 grit after the last layer for a smooth surface. Optionally apply Lemon oil as a final coat for an even higher gloss level.

Dry after 8-10 hours. Fully cured after 1-2 weeks. 

Tip: Check our Kovax Oil finish sanding system, ideal for use with Danish Oil.

Dangerous: Due to the risk of spontaneous combustion, used cloths, pads or similar materials used with this oil, should be loose and unfolded dried outside before disposal. Keep out of reach of children. Use only in a well-ventilated area.