Nitro Pro Lacquer Relic Golden Age Gloss 1000ml

Use:

Dilute the Nitro Pro with 10-20% Nitro Solvent or retarder when spraying in a high humidity environment until the required thickness is reached. Optimum consistency is like milk.
Sand the object until grain 400, use a grain filler for open pore woods.
The last sanding should be in the direction of the grain until all scratches have been removed.

Remove dust and greasy residue and apply 2-3 thin layers by spraying in cross sections.
After that, spray the regular layers with 60 minutes drying time in between.
Maximum 3 layers per day and allow 24 hours to dry before applying the next 3 layers.

Apply in total between 9-12 full layers to account for sanding and polishing.Sand lightly between coats for the best bond.
After the last 3 layers, let cure for 2 weeks minimum and polish.

The crackle will appear when the guitar is exposed to temperature differences. For the optimal crackle, place the guitar in the fridge at -20 degrees Celsius for 2 to 3 hours. Let it reach room temperature again and repeat. For the best result, finish with the Relic Patina.

Clean the nozzle after use by inverting the can and spray for 3-5 seconds.
Make sure to use a fine dust mask and spray in a well-ventilated area.

Find out more about Finishing materials, preparation and techniques in our how-to's about Finishing.