Nitro Pro Thinner 195ml
Nitro Thinner for use with your Nitro Pro lacquer.
Directions for use:
Dilute the Nitro Pro with 10-20% Nitro Solvent or retarder when spraying in a high humidity environment until the required thickness is reached. Optimum consistency is like milk.
Shake well before use. Sand the object until grit 400, use a grain filler with open pore woods. The last sanding run should be in the direction of the grain until all scratches have been removed. Remove dust and greasy residue and apply 2-3 thin layers by spraying crosswise as a base layer. After that, spray the regular layers with 60 minutes drying time in between. Maximal 3 layers per day and allow to dry 24 hours before applying the next 3 layers. After the last layer, let cure for 1-2 weeks minimum. Sand lightly between coats for the best bond. Clean tools with thinner or Nitro solvent.
Make sure to use a fine dust mask, spray in a well ventilated area & follow the safety instruvtions on the packaging.
Find out more about Finishing materials, preparation and techniques in our how-to's about Finishing.
|Brand||TLC Guitar Goods|
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example: