Fret crown file 3mm
Fret Crown file usable on both sides. Blade length of 105mm with a total length of 195mm. Quality steel, made in Japan.
After leveling your frets with either your fret leveling file or your radius block, you need to re-crown your frets.
Mark each fret with a marker on top so you can follow how much material you remove. Tip: use a fretboard protector while marking your frets.
Move the fret file over the top of your fret in the length till only a small strip of marker is visible at the center line of your fret. Make sure not to give too much presure and work in smooth strokes.
Find out more about finishing frets in our how-to's about frets.
Write Your Own Review
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example: