Electrical Shielding Paint 50ml
Shake well before use.
Make sure the material is sanded and dust / grease free.
Apply with brush.
Apply 2 coats for optimal protection with minimal 1 hour in between.
Dry for 24 hours after applying the last coat.
The paint should be a part of the electrical circuit, this will happen when the pot meters contact with the paint.
Clean tools with Water.
ready for use.
Based on a high quality pure acrylic binder.
Frost resistant, Breathable, solvent free, low-odor, low-emission.
Screening attenuation: One layer 40 dB.
Ingredients: Pure acrylic dispersion, graphite, water, carbon black, additives, preservative (MIT, BIT).
|Brand||TLC Guitar Goods|
|Touch dry after||60 min|
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example: