'59s Les Paul guitar routing template set 9-piece

With this durable set from recycled plexiglass you have an accurate template of a 24,75” 22 frets ‘59s Les Paul guitar. With the choice of wood, materials and finishing, you determine if it is going to be a so-called standard or special.

The templates are made from sturdy 5mm transparent plexiglass which gives an optimum view on your work and is far more wear resistant than MDF.

The body templates are equipped with centerlines and cavities for the electronics, neck pocket, pick-ups and has holes for the potmeters and bridge. In addition the positions are marked for the wiring channel, the jack and the carve-check templates that are available separately.

The neck / fretboard template comes with cavities for the traditional trapezoid inlay and has gaps for marking your fret positions. An additional template is supplied to route the lower part of the neck for the in-body placement.

The headstock template comes with holes for pre-drilling your tuner positions and has a cavity for your truss rod opening.

This set contains:
- Body template front side
- Body template back side
- Inside potmeter cavity template
- Outside potmeter cavity template
- Inside switch cavity template
- Outside switch cavity template
- Neck / fretboard template
- Neck-in body template
- Headstock template

Important specifications:
- Nut width: 42,85mm
- Heel width / fretboard end: 56,99mm
- Scale: 24,75" / 628,65mm
- Frets: 22
- Pickup formfactor: Standard size Humbuckers

Extra options:

Carve template set 8-piece
This set fits together like a matroesjka doll and requires positioning only once, which is done with help of the marked center lines and body contour. This design also allows you to route your pick-up cavity before your carve – when the top is still flat! After completion of one carve, you simply cut the double-sided sticky tape and peel the outer carve template. After that you can continue with the next one. After the works in done, this set is easy to store.

Carve-check template set 5-pece
These templates have the shape of the carve on one side which can be used to check the height and flow of your carve. They can be placed on the positions that are marked on the body template front side.

Pickguard template
With this pickguard template you can make your own pickguard in the material you like.

Availability:

In stock

Item

116203-123

€139.95 €115.66

Extra Options:

Les Paul carving template set 8-piece. Normal €59,95, but with this set + €52.50 €43.39

Les Paul carve-check template set 5-delig. Normaal € 29,95, maar bij deze set + €27.50 €22.73

Les Paul slagplaat template + €9.95 €8.22

Qty:

Details

Use:

Make sure your workpiece is placed steady, flat, at a good height with a comfortable working position and good view on your work area.
Be focused.
With routing, always wear protective clothing such as eye and ear protection and a dust mask. Use a vacuum cleaner to remove waste material and prevent that from heaping up.
Set the RPM to the advised rate that comes with your machine or router bit.
Keep the ball bearings of your template bits clean before and after use to make sure the bearing doesn’t get stuck during routing.
Never route too much material at once to prevent your router from breaking away and to avoid unnecessary ware on your router bit. Guide is maximum half of your router bits height and half of its diameter.
To create sufficient depth while keeping the guidance bearing of your template bit against the template, work with different lengths of bits, changing them when more depth is required.
secure templates with good double-sided sticky tape. If you secure the template with clamps, protect the wood of the body and make sure that your router can move freely.
Always use our templates so that the text is readable (or for left handed so that none is readable).
You can use the neck template to mark the fret positions on your fretboard. Always cut your fret slots before routing the shape of your fretboard.
Always check before routing if your purchased hardware and pick-ups fit in the template cavities.

More Information

More Information
Item	116203-123
Brand	TLC Guitar Goods
Model	'59s Les Paul
Type	Complete set
Material	Plexiglass
Weight	1.5kg
Sales unit	Set/9

Shipping

Good to know!

At Guitar Goods we do our very best to make things as easy and fun as possible, for example:

Quick shipment Everything ordered before 12.00CET is shipped the same day. We keep our own stock. If something unfortunately is out of stock, you can click the button with the item and we'll send you an email when it's back in stock.

Free shipping with orders of €110,- in The Netherlands, or a discount of €5,50 when shipping abroad. With a lower order amount the shipping costs are €5,50 in The Netherlands. The rates for other countries are stated on the order overview before payment.

14 Days on sight to evaluate your purchase. If you reconsider, no worries! Complete the return form and return the products in their original state. Details of our policy can be found here. Custom items or items customized for you cannot be returned.

Shoppoints are provided on every order, just because we are happy with you. You can spend your points with a next order to pay for (a part of) your next order. Sweet!

Custom options. We offer as a standard a couple of custom options such as decals in full color, black, white, silver & gold, but also custom inlays in your design, engravings of metal or plastic options, or how about a laser drawing on wood! if there is something else that you are looking for, please do contact us. We are always interested and will help you where we can.