Dot 6mm blue/white swirl
Handmade Inlay dot in an original color exclusively available from TLC Guitar Goods in 6mm diameter. Useful for marking fret positions in your own desired design. Can be polished to high gloss. Notice: price is per piece.
Only 2 left
Prepare your inlay design. Most common is for fret positions 3, 5, 7, 9, 12, 15, 17, 19, 22, 24 and centered or aligned to the left with double dots on the 12 & 24 to mark the octave. You can vary according to your own design fantasy. Mark your positions with an eyeleteer and trill the hole with a 6mm diameter drill. I usually than first radius my fretboard and check again of the holes are deep enough. Make sure that hole is not too deep and the inlay 'sinks' too far in. On the other hand, it should be deep enough for the inlay to remain completely visible after final radius sanding. When you're satisfied, put in a drop of medium thick superglue and position your inlay in the hole. after it has set, finish by sanding with your radius block and polish to the desired gloss.
|Brand||TLC Guitar Goods|
Write Your Own Review
Good to know!
At Guitar Goods we do our very best to make things as easy and fun as possible, for example: